HIKVISION TURBO HD H0T Series Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION TURBO HD H0T Series. HIKVISION TURBO HD H0T Series 17 halaman. Turbo hd turret & dome camera
Juga untuk HIKVISION TURBO HD H0T Series: Panduan Pengguna (16 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (14 halaman)
Halaman Cetak
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
8. Fit the bubble back to the camera.
Figure 2-15 Fit the Black Liner Back
9. Tighten the screws on the bubble of the dome
camera to finish the installation.
Tilt Position
0° to 75°
Figure 2-14 3-Axis Adjustment
Figure 2-16 Finish Installation
Pan Position
0° to 355°
Rotation Position
0° to 355°