HIKVISION TurboHD H0T Series Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 pages. Turbo hd bullet & dome camera
Également pour HIKVISION TurboHD H0T Series : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (17 pages)

5. Attach the mounting base to the ceiling and secure

it with supplied screws. For cement ceiling, you

need to mount the expansion bolts at first.

Figure 2-4 Attach the Mounting Base to the Ceiling

6. Route cables through the cable hole or the side

opening.

7. Install the camera back to the mounting base and

secure it.

8. Connect the corresponding power cord, and video

cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

1. Paste the drill template on the place where you

want to install the camera.

2. Drill screw holes and the cable hole (optional)

according to the drill template.

3. Take apart the junction box, and align the screw

holes of the mounting base with those on the

junction box's cover.

Figure 2-5 Install the Camera Back

Figure 2-6 3-Axis Adjustment

Figure 2-7 The Drill Template