HIKVISION TurboHD H0T Series 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION TurboHD H0T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TurboHD H0T Series 17 페이지. Turbo hd bullet & dome camera
HIKVISION TurboHD H0T Series에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
5. Attach the mounting base to the ceiling and secure
it with supplied screws. For cement ceiling, you
need to mount the expansion bolts at first.
Figure 2-4 Attach the Mounting Base to the Ceiling
6. Route cables through the cable hole or the side
opening.
7. Install the camera back to the mounting base and
secure it.
8. Connect the corresponding power cord, and video
cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
2.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Paste the drill template on the place where you
want to install the camera.
2. Drill screw holes and the cable hole (optional)
according to the drill template.
3. Take apart the junction box, and align the screw
holes of the mounting base with those on the
junction box's cover.
Figure 2-5 Install the Camera Back
Figure 2-6 3-Axis Adjustment
Figure 2-7 The Drill Template