HIKVISION TurboHD H0T Series 사용자 설명서 - 페이지 8
{카테고리_이름} HIKVISION TurboHD H0T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION TurboHD H0T Series 17 페이지. Turbo hd bullet & dome camera
HIKVISION TurboHD H0T Series에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
4. Install the mounting base on the junction box's
cover with three PM4 screws.
5. Secure the junction box's body on the wall with
three PA4 × 25 screws.
Figure 2-8 Secure the Junction Box
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box's cover with its body.
8. Repeat step 7 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to finish the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Before you start:
The ceiling mounting and the wall mounting are similar.
Following takes ceiling mounting as an example.
Steps:
1. Pry the mounting base by using a flat object, for
example, a coin.
Figure 2-10 Pry the Mounting Base
2. Paste the drill template (supplied) to the place
where you want to install the camera.
3. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Figure 2-9 Finish the Installation
A Coin