HIKVISION TurboHD H0T Series User Manual - Page 8

Browse online or download pdf User Manual for Security Camera HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 pages. Turbo hd bullet & dome camera
Also for HIKVISION TurboHD H0T Series: User Manual (17 pages), User Manual (16 pages), User Manual (13 pages), User Manual (18 pages), User Manual (15 pages), User Manual (15 pages), User Manual (17 pages)

Print Page
HIKVISION TurboHD H0T Series User Manual
4. Install the mounting base on the junction box's
cover with three PM4 screws.
5. Secure the junction box's body on the wall with
three PA4 × 25 screws.
Figure 2-8 Secure the Junction Box
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box's cover with its body.
8. Repeat step 7 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to finish the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
Before you start:
The ceiling mounting and the wall mounting are similar.
Following takes ceiling mounting as an example.
Steps:
1. Pry the mounting base by using a flat object, for
example, a coin.
Figure 2-10 Pry the Mounting Base
2. Paste the drill template (supplied) to the place
where you want to install the camera.
3. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
Figure 2-9 Finish the Installation
A Coin