HIKVISION TurboHD H0T Series Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 páginas. Turbo hd bullet & dome camera
También para HIKVISION TurboHD H0T Series: Manual del usuario (17 páginas), Manual del usuario (16 páginas), Manual del usuario (13 páginas), Manual del usuario (18 páginas), Manual del usuario (15 páginas), Manual del usuario (15 páginas), Manual del usuario (17 páginas)

4. Install the mounting base on the junction box's

cover with three PM4 screws.

5. Secure the junction box's body on the wall with

three PA4 × 25 screws.

Figure 2-8 Secure the Junction Box

6. Route the cables through the bottom cable hole, or

the side cable hole of the junction box.

7. Combine the junction box's cover with its body.

8. Repeat step 7 to 9 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to finish the installation.

2.2 Installation of Type II Camera

2.2.1 Ceiling/Wall Mounting without Junction Box

Before you start:

The ceiling mounting and the wall mounting are similar.

Following takes ceiling mounting as an example.

Steps:

1. Pry the mounting base by using a flat object, for

example, a coin.

Figure 2-10 Pry the Mounting Base

2. Paste the drill template (supplied) to the place

where you want to install the camera.

3. Drill the screw holes according to the drill template,

and the cable hole (optional) on the ceiling.

Figure 2-9 Finish the Installation

A Coin