Ganz ZN-S1000VNE Manuel d'installation rapide
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Ganz ZN-S1000VNE. Ganz ZN-S1000VNE 5 pages. 1ch h.264 encoder
Imprimer la page
ZN-S1000VE
This manual has been designed to guide you through basic settings of your IP devices, such as installation and
configuration for using them.
Step1. Connect cables to IP device
Connect each cable to the device. To see the correct positions of all connectors, refer to the following image
below.
LAN
RESET Button
Step2. Set up network environment
The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP address from the
MAC address of your device. Please make sure the device and your PC are on the same network segment
before running the installation. If the network segment was different between your PC and the device, change
your PC's settings as below.
IP address : 192.168.xxx.xxx
Subnet mask: 255.255.0.0
2010/2‐1
Quick Installation Guide
DC 12V
* Models herein and their appearance
are subject to change without any prior
notice.
1
VIN