Ganz ZN-S1000VNE Snelle installatiehandleiding

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Ganz ZN-S1000VNE. Ganz ZN-S1000VNE 5 pagina's. 1ch h.264 encoder

ZN-S1000VE

This manual has been designed to guide you through basic settings of your IP devices, such as installation and

configuration for using them.

Step1. Connect cables to IP device

Connect each cable to the device. To see the correct positions of all connectors, refer to the following image

below.

LAN

RESET Button

Step2. Set up network environment

The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP address from the

MAC address of your device. Please make sure the device and your PC are on the same network segment

before running the installation. If the network segment was different between your PC and the device, change

your PC's settings as below.

IP address : 192.168.xxx.xxx

Subnet mask: 255.255.0.0

2010/2‐1

Quick Installation Guide

DC 12V

* Models herein and their appearance

are subject to change without any prior

notice.

VIN