Avantco 178MC34HC Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco 178MC34HC. Avantco 178MC34HC 9 pages. School milk cooler
Également pour Avantco 178MC34HC : Manuel de l'utilisateur (9 pages)
Imprimer la page
PROPER GROUNDING REQUIRED
To minimize shock and fire hazards, make sure that the unit is properly grounded.
WARNING
•
Do not attempt to remove or repair any component unless instructed by factory.
•
Make sure that the unit is not resting on or against the electrical cord and plug.
•
To minimize personal injury, do not hang on the doors.
•
Do not store any flammable and explosive gas or liquids inside the unit.
•
Do not attempt to alter or tamper with the electrical cord.
Operation / Maintenance
WARNING
DISCONNECT THE POWER CORD BEFORE CLEANING ANY PARTS OF THE UNIT.
NOTE: We strongly recommend that any servicing be performed by an authorized service technician.
Loading Product
-Make sure there is at least four inches of clearance from the evaporator.
-Ensure all shelves are sitting level and properly secured before loading products.
-Do not store flammable and explosive gas or liquids inside the unit.
Cleaning the Condenser Coil
-For efficient operation, keep the condenser surface free of dust, dirt, and lint.
-We recommend cleaning the condenser coil at least once per month.
Cleaning the Interior of the Unit
-When cleaning the cabinet interior, use a solvent of warm water and mild soap.
-Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior finish.
-Wash door gaskets on a regular basis, preferably weekly. Simply remove the door gasket from the frame of
the door, soak in warm water and soap for thirty (30) minutes, dry it with a soft cloth, and replace it.
-Check door gaskets for proper seal after they are replaced.
User Manual
Commercial School Milk Coolers
www.AvantcoRefrigeration.com
7