Avantco 178MC34HC Kullanıcı Kılavuzu - Sayfa 7

Mutfak Aletleri Avantco 178MC34HC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco 178MC34HC 9 sayfaları. School milk cooler
Ayrıca Avantco 178MC34HC için: Kullanıcı Kılavuzu (9 sayfalar)

Sayfayı Yazdır

PROPER GROUNDING REQUIRED

To minimize shock and fire hazards, make sure that the unit is properly grounded.

WARNING

•

Do not attempt to remove or repair any component unless instructed by factory.

•

Make sure that the unit is not resting on or against the electrical cord and plug.

•

To minimize personal injury, do not hang on the doors.

•

Do not store any flammable and explosive gas or liquids inside the unit.

•

Do not attempt to alter or tamper with the electrical cord.

Operation / Maintenance

WARNING

DISCONNECT THE POWER CORD BEFORE CLEANING ANY PARTS OF THE UNIT.

NOTE: We strongly recommend that any servicing be performed by an authorized service technician.

Loading Product

-Make sure there is at least four inches of clearance from the evaporator.

-Ensure all shelves are sitting level and properly secured before loading products.

-Do not store flammable and explosive gas or liquids inside the unit.

Cleaning the Condenser Coil

-For efficient operation, keep the condenser surface free of dust, dirt, and lint.

-We recommend cleaning the condenser coil at least once per month.

Cleaning the Interior of the Unit

-When cleaning the cabinet interior, use a solvent of warm water and mild soap.

-Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior finish.

-Wash door gaskets on a regular basis, preferably weekly. Simply remove the door gasket from the frame of

the door, soak in warm water and soap for thirty (30) minutes, dry it with a soft cloth, and replace it.

-Check door gaskets for proper seal after they are replaced.

User Manual

Commercial School Milk Coolers