GAPOSA XQ Sileo XS 40 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} GAPOSA XQ Sileo XS 40. GAPOSA XQ Sileo XS 40 15 pages. Tubular motors with encoder electronic limits
Également pour GAPOSA XQ Sileo XS 40 : Manuel (16 pages)

Imprimer la page
GAPOSA XQ Sileo XS 40 Manuel
PROGRAMMING
PROGRAMMING TRANSMITTER
CAUTION: If more motors with receiver have to be installed, it is important to
power up only one motor at time during the first programming session,
in order to avoid any interferences with others.
Power up the motor to be
1
programmed.
Press and hold the PROG-TX
2
button until the motor starts
moving.
Check the rotation of the motor,
3
then release PROG-TX (the motor
stops).
Within 5 seconds press the
corresponding button (i.e. UP
if the motor rotates upwards
4
or DOWN if vice versa).
The transmitter has been
programmed and the rotation of
the motor has been synchronized.
1/4
OFF
ON