GAPOSA XQ Sileo XS 40 매뉴얼 - 페이지 7

{카테고리_이름} GAPOSA XQ Sileo XS 40에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAPOSA XQ Sileo XS 40 15 페이지. Tubular motors with encoder electronic limits
GAPOSA XQ Sileo XS 40에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

페이지 인쇄
GAPOSA XQ Sileo XS 40 매뉴얼
PROGRAMMING
PROGRAMMING TRANSMITTER
CAUTION: If more motors with receiver have to be installed, it is important to
power up only one motor at time during the first programming session,
in order to avoid any interferences with others.
Power up the motor to be
1
programmed.
Press and hold the PROG-TX
2
button until the motor starts
moving.
Check the rotation of the motor,
3
then release PROG-TX (the motor
stops).
Within 5 seconds press the
corresponding button (i.e. UP
if the motor rotates upwards
4
or DOWN if vice versa).
The transmitter has been
programmed and the rotation of
the motor has been synchronized.
1/4
OFF
ON