Avantco 177MX20SHRDR Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco 177MX20SHRDR. Avantco 177MX20SHRDR 8 pages. Slicer & shredder attachment for 177mx20 & other mixers with #12 hub
Imprimer la page
User Manual
Loading Attachment onto #12 Hub
1. Before mounting the unit, make sure that the power source is turned off.
2. Carefully lift the assembled unit (Fig. 11) and insert the square milled shaft end into the hub while turning
the unit to engage the square end on the shaft with the square hole in the adapter.
3. Slide the unit forward and push the unit fully forward on to the hub.
4. Tighten the thumbscrew to secure the unit to the hub. (Fig. 12)
5. The vegetable slicer attachment is now ready to process product.
How to Adjust Thickness
1. Either before install or after install, the plate
can be adjusted (Fig. 13) to slice product to
different thicknesses by turning the adjusting
plastic knob as shown. (Fig. 14)
Operation Instructions
1. Connect the electrical supply to the power source equipment, turn the
power source equipment on.
2. Lift the feed plate to expose the processing plate unit and drop product
into the feed hopper. (Fig. 15)
3. Keep hands and fingers out of the hopper.
4. With the feed plate, gently push the product into the rotating plate unit.
6
Fig. 11
Fig. 13
Fig. 15
Fig. 12
Fig. 14