Avantco 177MX20SHRDR Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco 177MX20SHRDR. Avantco 177MX20SHRDR 8 pages. Slicer & shredder attachment for 177mx20 & other mixers with #12 hub
Imprimer la page
Installation
Installing Slicer Knife Attachment onto Housing
1. Lift the knife assembly (Fig. 1) and insert it into the rear housing. (Fig. 2)
2. Lift the lock pin and seat the plate unit with a gentle twist. (Fig. 3)
3. Make sure that the thrust bearing on the shaft is fully inserted into the rear housing.
4. Release the lock pin and close and securely latch the front housing. (Fig. 4)
5. The vegetable slicer attachment is now ready to be loaded to the power source equipment.
Fig. 1
Installing Shredder Disc onto
Disc-Holder Assembly
1. Place the disc on the shaft so that the cutting
edges face you. (Fig. 5)
2. Carefully turn the shaft clockwise until pin
aligns with the notch on the disc holder.
3. Push the disc holder assembly down and turn
to lock both disc and pin into place. (Fig. 6)
Installing Disc-Holder Assembly onto Housing
1. Lift the disc-holder assembly (Fig. 7) and insert it into the rear housing. (Fig. 8)
2. Lift the lock pin and seat the plate unit with a gentle twist. (Fig. 9)
3. Make sure that the thrust bearing on the shaft is fully inserted into the rear housing.
4. Release the lock pin and close and securely latch the front housing. (Fig. 10)
5. The vegetable slicer attachment is now ready to be loaded to the power source equipment.
Fig. 7
User Manual
Fig. 2
Fig. 8
Fig. 3
Fig. 5
Fig. 9
Fig. 4
Fig. 6
Fig. 10
5