Avantco 177MX20SHRDR 사용자 설명서 - 페이지 5

{카테고리_이름} Avantco 177MX20SHRDR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 177MX20SHRDR 8 페이지. Slicer & shredder attachment for 177mx20 & other mixers with #12 hub

페이지 인쇄

Installation

Installing Slicer Knife Attachment onto Housing

1. Lift the knife assembly (Fig. 1) and insert it into the rear housing. (Fig. 2)

2. Lift the lock pin and seat the plate unit with a gentle twist. (Fig. 3)

3. Make sure that the thrust bearing on the shaft is fully inserted into the rear housing.

4. Release the lock pin and close and securely latch the front housing. (Fig. 4)

5. The vegetable slicer attachment is now ready to be loaded to the power source equipment.

Fig. 1

Installing Shredder Disc onto

Disc-Holder Assembly

1. Place the disc on the shaft so that the cutting

edges face you. (Fig. 5)

2. Carefully turn the shaft clockwise until pin

aligns with the notch on the disc holder.

3. Push the disc holder assembly down and turn

to lock both disc and pin into place. (Fig. 6)

Installing Disc-Holder Assembly onto Housing

1. Lift the disc-holder assembly (Fig. 7) and insert it into the rear housing. (Fig. 8)

2. Lift the lock pin and seat the plate unit with a gentle twist. (Fig. 9)

3. Make sure that the thrust bearing on the shaft is fully inserted into the rear housing.

4. Release the lock pin and close and securely latch the front housing. (Fig. 10)

5. The vegetable slicer attachment is now ready to be loaded to the power source equipment.

Fig. 7

User Manual

Fig. 2

Fig. 8

Fig. 3

Fig. 5

Fig. 9

Fig. 4

Fig. 6

Fig. 10