Makita 4323 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 4323. Makita 4323 17 pages. Makita 4323 jig saw: specifications
Également pour Makita 4323 : Manuel des pièces détachées (2 pages), Manuel d'instruction (19 pages)

Imprimer la page

1. Retainer

2. Blade

3. Roller

4. Base

5. Bolt

6. Hex wrench

1. Dust cover

OPERATION

1. Cutting line

2. Base

Adjusting roller

002728

Loosen the bolt on the back of the base with the hex wrench. Move the

retainer so that the roller contacts the blade lightly. Then tighten the bolt to

secure the base and the retainer.

NOTE:

•

Occasionally lubricate the roller.

Dust cover

002729

CAUTION:

•

Always wear safety goggles even when operating the tool with the dust

cover lowered.

Lower the dust cover to prevent chips from flying. However, when making

bevel cuts, raise it all the way.

CAUTION:

•

Always hold the base flush with the workpiece. Failure to do so may

cause blade breakage, resulting in a serious injury.

•

Advance the tool very slowly when cutting curves or scrolling. Forcing

the tool may cause a slanted cutting surface and blade breakage.

Turn the tool on without the blade making any contact and wait until the blade

002743

attains full speed. Then rest the base flat on the workpiece and gently move

the tool forward along the previously marked cutting line.