Makita 4323 사용 설명서 - 페이지 7

{카테고리_이름} Makita 4323에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4323 17 페이지. Makita 4323 jig saw: specifications
Makita 4323에 대해서도 마찬가지입니다: 부품 설명서 (2 페이지), 사용 설명서 (19 페이지)

페이지 인쇄

1. Retainer

2. Blade

3. Roller

4. Base

5. Bolt

6. Hex wrench

1. Dust cover

OPERATION

1. Cutting line

2. Base

Adjusting roller

002728

Loosen the bolt on the back of the base with the hex wrench. Move the

retainer so that the roller contacts the blade lightly. Then tighten the bolt to

secure the base and the retainer.

NOTE:

•

Occasionally lubricate the roller.

Dust cover

002729

CAUTION:

•

Always wear safety goggles even when operating the tool with the dust

cover lowered.

Lower the dust cover to prevent chips from flying. However, when making

bevel cuts, raise it all the way.

CAUTION:

•

Always hold the base flush with the workpiece. Failure to do so may

cause blade breakage, resulting in a serious injury.

•

Advance the tool very slowly when cutting curves or scrolling. Forcing

the tool may cause a slanted cutting surface and blade breakage.

Turn the tool on without the blade making any contact and wait until the blade

002743

attains full speed. Then rest the base flat on the workpiece and gently move

the tool forward along the previously marked cutting line.