Makita 4324 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 4324. Makita 4324 16 pages. Jig saw
Également pour Makita 4324 : Manuel des pièces détachées (2 pages), Manuel d'instruction (19 pages), Manuel d'instruction (10 pages)

Installing or removing

the

saw blade

CAUTION:

*Always be sure that the tool is switched off and unplugged before installing or removing

the blade.

*Always clean out all chips or foreign matter adhering to the blade and/or blade holder.

Failure to do so may cause insufficient tightening of the blade, resulting in a serious injury.

To install the blade, loosen the bolt on the

blade holder with the hex wrench.

With the blade teeth facing forward, insert

the blade into the blade holder as far as it

will go. Make sure that the back edge of the

blade fits into the roller. Then tighten the

bolt to secure the blade.

To remove the blade, follow the installation

procedures in revers.

NOTE:

Occasionally lubricate the roller