Makita 4324 사용 설명서 - 페이지 5

{카테고리_이름} Makita 4324에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4324 16 페이지. Jig saw
Makita 4324에 대해서도 마찬가지입니다: 부품 설명서 (2 페이지), 사용 설명서 (19 페이지), 사용 설명서 (10 페이지)

페이지 인쇄

Installing or removing

the

saw blade

CAUTION:

*Always be sure that the tool is switched off and unplugged before installing or removing

the blade.

*Always clean out all chips or foreign matter adhering to the blade and/or blade holder.

Failure to do so may cause insufficient tightening of the blade, resulting in a serious injury.

To install the blade, loosen the bolt on the

blade holder with the hex wrench.

With the blade teeth facing forward, insert

the blade into the blade holder as far as it

will go. Make sure that the back edge of the

blade fits into the roller. Then tighten the

bolt to secure the blade.

To remove the blade, follow the installation

procedures in revers.

NOTE:

Occasionally lubricate the roller