Avantco Equipment DC1800 Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco Equipment DC1800. Avantco Equipment DC1800 6 pages. 1800 watt drop-in induction range
Imprimer la page
ERROR CODES
Cause
E0
No cookware on plate or non-usable cookware.
The cooker has become too hot.
E1
(e.g. due to blocked ventilation slots)
Overheating protection was activated and the cooker
E2
has switched off.
E3
Temporary voltage overload. Cooker became too hot.
NOTE:
For added precaution, if you receive error codes E1, E2, or E3, unplug the unit immediately and let it cool down completely.
Cleaning
WARNING! DANGER OF BURNING AND ELECTRIC SHOCK.
ALWAYS SWITCH OFF AND UNPLUG APPLIANCE AFTER USE AND BEFORE CLEANING.
LET THE APPLIANCE COOL DOWN BEFORE CLEANING AND STORAGE.
NEVER IMMERSE THE APPLIANCE IN WATER OR CLEAN IT UNDER RUNNING WATER.
1. Disconnect plug and wait until the unit has cooled down completely. Clean after using every time.
2. If the pots/pans are used without being cleaned, discoloration or cooked-on stains may be caused.
3. DO NOT use benzine, thinner, scrubbing brush, or polishing powder to clean the induction cooker.
4. Wipe using dish washing agent and damp cloth. Make sure the unit dries completely before plugging it back in.
5. Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
6. NEVER run water over the unit (water that gets inside may cause malfunction).
www.AvantcoEquipment.com
User Manual
Solution
Place suitable cookware on cooking plate.
Clear vents, let cooker cool down before restarting.
If error message continues, contact manufacturer.
Remove cookware from cooker and let unit cool down
before restarting.
Let cooker cool down before restarting.
5