Avantco Equipment DC1800 사용자 설명서 - 페이지 5

{카테고리_이름} Avantco Equipment DC1800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco Equipment DC1800 6 페이지. 1800 watt drop-in induction range

ERROR CODES

Cause

No cookware on plate or non-usable cookware.

The cooker has become too hot.

(e.g. due to blocked ventilation slots)

Overheating protection was activated and the cooker

has switched off.

Temporary voltage overload. Cooker became too hot.

NOTE:

For added precaution, if you receive error codes E1, E2, or E3, unplug the unit immediately and let it cool down completely.

Cleaning

WARNING! DANGER OF BURNING AND ELECTRIC SHOCK.

ALWAYS SWITCH OFF AND UNPLUG APPLIANCE AFTER USE AND BEFORE CLEANING.

LET THE APPLIANCE COOL DOWN BEFORE CLEANING AND STORAGE.

NEVER IMMERSE THE APPLIANCE IN WATER OR CLEAN IT UNDER RUNNING WATER.

1. Disconnect plug and wait until the unit has cooled down completely. Clean after using every time.

2. If the pots/pans are used without being cleaned, discoloration or cooked-on stains may be caused.

3. DO NOT use benzine, thinner, scrubbing brush, or polishing powder to clean the induction cooker.

4. Wipe using dish washing agent and damp cloth. Make sure the unit dries completely before plugging it back in.

5. Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.

6. NEVER run water over the unit (water that gets inside may cause malfunction).

www.AvantcoEquipment.com

User Manual

Solution

Place suitable cookware on cooking plate.

Clear vents, let cooker cool down before restarting.

If error message continues, contact manufacturer.

Remove cookware from cooker and let unit cool down

before restarting.

Let cooker cool down before restarting.