CORNING MRU Assemblage Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Assemblage Manuel d'installation pour {nom_de_la_catégorie} CORNING MRU. CORNING MRU 12 pages. Mid-power remote unit outdoor enclosure mimo

Imprimer la page

CONNECT RF ANTENNA COAX

For both 4.3-10 Type "ANTENNA PORT" and "2.5 GHz INPUT

PORT" - route coax cables (with 90-degree right-angle

connector) through their designated knockouts (see Figure

2) behind and above both MRU chassis and connect to the

corresponding RF ports. Refer to Figure 9.

ROUTE FIBER AND POWER CABLES

IMPORTANT! If cables are routed without the use of conduits,

the knockouts must be sealed using appropriate sealing

materials.

Route optic fiber from fiber switch and power cables, for

both MRUs, through designated knockouts (see Figure 2) and

connect according to instructions in MRU quick installation

sheet. Refer to Figure 9.

Note: For DC power connections – route DC power cable with

open wires (without connector) and then wire according to

instructions in MRU quick installation sheet (CMA-398-AEN).

Corning Optical Communications

Figure 9. Example of Routed

Connection Cables

Quick Installation Sheet | CMA-595-AEN | Page 6