Makita 5090DW Manuel d'instruction - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 5090DW. Makita 5090DW 17 pages. 85mm with fast charger
Également pour Makita 5090DW : Liste des pièces (1 pages)

Imprimer la page

CUlTlNG ADJUSTMENTS

CAUTION: Remove battery before making any cutting adjustments.

Use only the Makita hex wrench to loosen the bolts.

Adjusting Depth

of cut

To adjust depth of cut:

Using the hex wrench, loosen the

bolt (A) on the depth guide.

2. Move the base up or down.

3. At the desired depth of cut, secure

the base by tightening the bolt (A).

Bevel Cutting

For bevel cutting:

1. Using the hex wrench, loosen the

bolt (A) on the depth guide.

2. Loosen the bolt (6) on the bevel

scale plate.

3. Set the desired angle

(OD

45")

by tilting accordingly.

4. Tighten bolts (A) and (B) securely.

CAUTION: After adjusting depth of cut and bevel cutting angle, be sure to tighten the

bolts (A) and (6) securely.

Sighting

For straight cuts:

Align the edge of the base with

your cutting line on the workpiece.

For 4 5 O bevel cuts:

1. Align the notch in the front of the

base with your cutting line on the

workpiece.