Makita 5090DW Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 5090DW. Makita 5090DW 17 páginas. 85mm with fast charger
Também para Makita 5090DW: Lista de peças (1 páginas)

Imprimir página

CUlTlNG ADJUSTMENTS

CAUTION: Remove battery before making any cutting adjustments.

Use only the Makita hex wrench to loosen the bolts.

Adjusting Depth

of cut

To adjust depth of cut:

Using the hex wrench, loosen the

bolt (A) on the depth guide.

2. Move the base up or down.

3. At the desired depth of cut, secure

the base by tightening the bolt (A).

Bevel Cutting

For bevel cutting:

1. Using the hex wrench, loosen the

bolt (A) on the depth guide.

2. Loosen the bolt (6) on the bevel

scale plate.

3. Set the desired angle

(OD

45")

by tilting accordingly.

4. Tighten bolts (A) and (B) securely.

CAUTION: After adjusting depth of cut and bevel cutting angle, be sure to tighten the

bolts (A) and (6) securely.

Sighting

For straight cuts:

Align the edge of the base with

your cutting line on the workpiece.

For 4 5 O bevel cuts:

1. Align the notch in the front of the

base with your cutting line on the

workpiece.