Avante HI-LO FLEX Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Avante HI-LO FLEX. Avante HI-LO FLEX 16 pages.

TROUBLESHOOTING

Below is a list of possible problems & their solutions should the

adjustable base fail to operate properly

PROBLEM

The base does not respond when the

remote is used.

Remote LED illuminates and appears

to be normal.

The remote does not work

or does not light up.

Base stutters while in motion.

If you have followed the instructions outlined in this manual, and your problem

is persisting, please contact the retailer you originally purchased your bed from

Check that the power cord is plugged into a

•

working & grounded electrical outlet.

Check that the light on the transformer is on.

•

Check the home's circuit breaker & fuses.

•

Unplug the power cord from the outlet. After

•

one minute, plug it back in. Press any button

on the remote.

Check the remote LED light is lighting up

•

when pressed. If not, please check that the

power cord is plugged into a working &

grounded electrical outlet.

Clear any clutter or obstructions under &

•

around the adjustable base. Radio frequency

interference from other remotes or electronic

devises may affect normal operation.

Ensure the buttons on the remote are being

•

pressed firmly down when operating the Head

& Foot functions.

or Avante Australia for further assistance.

Page 9

SOLUTION

Perform any or all of the following: