Jameasy Plus Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Jameasy Plus. Jameasy Plus 3 pages.

Imprimer la page

Jameasy Plus

User Guide BPVN01

Thank you for purchasing the Jameasy

Plus. Please read this user guide

before using the device. If this product

will be used by young children, this

manual should be read and explained

to them by an adult.

※ Please read the manual for the

Jameasy application.

(http://jameasy.com ‒ Product ‒ User

manual)

Getting Started

1. Search Jameasy app on Google

Play or App Store and download the

app on your smartphone or tablet.

For more information about the

Jameasy app and supported smart

phone models, visit our website at

'http://jameasy.com'

※ Before following these steps, check

whether data connection is available

and Bluetooth is allowed of your

smartphone.

2. Remove the plastic

insulation tab from your

device and turn it on.

※ The new product

includes a plastic tab to

prevent a battery from

discharging.

3. Connect the device

with your smartphone.

Run the app and go to

device setting screen in

the app. When the device

list is displayed, tap

'connect' button.

The Status LED will softly blink yellow

when the device is successfully connect-

ed.

Clip the device onto a violin

A scroll of a violin is the recommended

place without corrupting the original

sound of a violin.

To prevent your violin from any physical

damage, please remove the device

after use.

Components

violin

This package includes a Jameasy

device and an user guide. The device

contains a non-rechargeable button-

type battery (CR2032) already installed.

Battery

cover

Rubber

buﬀer

※ To turn on the device, press and hold

the power button until 'beep-' sound

and the LED lights up.

WARNING : CHOKING HAZARD

Not for children under 3 years.

Battery Replacement

When the LED turns red, the battery

(CR2032) should be replaced. Press

the middle part of the device, and slide

and remove the battery cover located

on the head of the device as shown in

illustration below. After removing the

old battery, insert the new battery with

the positive side (+) facing upward.

Power OFF / Sleep Mode

To turn oﬀ the device, press the power

button until 'beep' sounds. The device

will be turned oﬀ automatically when

the device is left without connecting to

the application more than one minute,

or not used more than 10 minutes.

Status LED

Colors and blink period of LED show

the status of the device described as

below.

LED Status

LED off

Yellow, Short blink

Yellow, Soft blink

Yellow, Solid LED

Red

Power

button

LED

Status

Clip

- Small parts

Instructions

Power off

Power on, Paring off

Power on, Paring on

Power on, Practice mode

Have to replace battery