Jameasy Plus 사용자 설명서
{카테고리_이름} Jameasy Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Jameasy Plus 3 페이지.
Jameasy Plus
User Guide BPVN01
Thank you for purchasing the Jameasy
Plus. Please read this user guide
before using the device. If this product
will be used by young children, this
manual should be read and explained
to them by an adult.
※ Please read the manual for the
Jameasy application.
(http://jameasy.com ‒ Product ‒ User
manual)
Copyright ⓒ 2015 Jameasy Inc. All rights reserved
Getting Started
1. Search Jameasy app on Google
Play or App Store and download the
app on your smartphone or tablet.
For more information about the
Jameasy app and supported smart
phone models, visit our website at
'http://jameasy.com'
※ Before following these steps, check
whether data connection is available
and Bluetooth is allowed of your
smartphone.
2. Remove the plastic
insulation tab from your
device and turn it on.
※ The new product
includes a plastic tab to
prevent a battery from
discharging.
3. Connect the device
with your smartphone.
Run the app and go to
device setting screen in
the app. When the device
list is displayed, tap
'connect' button.
The Status LED will softly blink yellow
when the device is successfully connect-
ed.
Clip the device onto a violin
A scroll of a violin is the recommended
place without corrupting the original
sound of a violin.
To prevent your violin from any physical
damage, please remove the device
after use.
<clip example>
Components
violin
This package includes a Jameasy
device and an user guide. The device
contains a non-rechargeable button-
type battery (CR2032) already installed.
Battery
cover
Rubber
buffer
※ To turn on the device, press and hold
the power button until 'beep-' sound
and the LED lights up.
WARNING : CHOKING HAZARD
Not for children under 3 years.
Battery Replacement
When the LED turns red, the battery
(CR2032) should be replaced. Press
the middle part of the device, and slide
and remove the battery cover located
on the head of the device as shown in
illustration below. After removing the
old battery, insert the new battery with
the positive side (+) facing upward.
Power OFF / Sleep Mode
To turn off the device, press the power
button until 'beep' sounds. The device
will be turned off automatically when
the device is left without connecting to
the application more than one minute,
or not used more than 10 minutes.
Status LED
Colors and blink period of LED show
the status of the device described as
below.
LED Status
LED off
Yellow, Short blink
Yellow, Soft blink
Yellow, Solid LED
Red
Power
button
LED
Status
Clip
- Small parts
Instructions
Power off
Power on, Paring off
Power on, Paring on
Power on, Practice mode
Have to replace battery