Avante Volumax VOS Manuel de référence rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Avante Volumax VOS. Avante Volumax VOS 4 pages.

Imprimer la page

Avante Volumax VOS

Quick Reference Guide

DISPOSABLE PATIENT CIRCUIT

•

Attach High or Low Flow Vapor Transfer Cartridge to Disposable Water Path

•

Attach patient delivery tube to Disposable Water Path

•

Open door and install Disposable Water Path into docking station

•

Hang sterile water bag

•

Wipe water spike with alcohol pad and insert into sterile water bag

•

Volumax VOS is ready for start up

START UP AND ADJUSTING PARAMETERS

•

Install oxygen sensor

•

Rotate the blue Setting Control Knob to illuminate display

•

Press in Setting Control Knob to select the parameter and rotate to adjust

the value

•

Press and release (do not hold) the Run/Standby button once to start.

A GREEN light indicates RUN mode (AMBER light indicates STANDBY mode,

No Flow)

•

CONNECT TO PATIENT

•

Place the cannula on the delivery tube

•

After cannula is attached, it is ready to be placed on patient

•

To activate the internal backup battery mode, the Run/Standby LED must

be green before disconnecting the power cord.

•

percentage for at least 15 minutes.

•

SHUT DOWN MODE

•

Press the Run/Standby button. Unit will enter Standby mode.

•

Clamp the water inlet tube and disconnect it by pulling out the spike.

•

Open the door, remove the Disposable Patient Circuit (includes delivery

tube & cartridge) by sliding it upwards out of the docking station

•

Discard all disposables according to hospital guidelines.

•

Disconnect unit from AC power.

2601 Stanley Gault Pkwy, Suite 101

800-923-8413

502-244-6345

FAX: 502-244-0369

•

Louisville, KY 40223 USA

•