Makita 6922NB Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 6922NB. Makita 6922NB 12 pages. Shear wrench
Également pour Makita 6922NB : Ventilation des pièces (3 pages), Ventilation des pièces (3 pages), Manuel d'instruction (8 pages)

Imprimer la page

Insert the outer and inner

sleeves

into the tool while rotating the inner sleeve alternately

clockwise and counterclockwise until there i s no gap between the outer sleeve and the

tool.

See the figure below. Then tighten the two screws securely.

Switch action

To start

the

tool, simply pull the trigger. Release the trigger to stop.

C A U T I O N

Before plugging in the tool, always check

to see

that the trigger switch actuates proper-

ly and returns to the "OFF" position when released.

Bolt installation

Slip the tool onto the bolt

that the inner

sleeve

completely covers the bolt tip.

CAUTION :

careful when fitting the

sleeve

onto the

bolt tip.

Striking the tip can damage i t

that it will no longer fit inside the sleeve

properly.

Keep forward pressure on the tool while

sliding

further forward until the outer

sleeve

fits completely over the nut. I f the

tool fails to fit completely over the nut,

twist the tool slightly right and left while

pushing forward.

sleeve

Pull the trigger switch. The outer

sleeve

turns to begin tightening the nut.