Makita 6922NB Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 6922NB. Makita 6922NB 12 сторінок. Shear wrench
Також для Makita 6922NB: Розбивка на частини (3 сторінок), Розбивка на частини (3 сторінок), Інструкція з експлуатації (8 сторінок)

Insert the outer and inner

sleeves

into the tool while rotating the inner sleeve alternately

clockwise and counterclockwise until there i s no gap between the outer sleeve and the

tool.

See the figure below. Then tighten the two screws securely.

Switch action

To start

the

tool, simply pull the trigger. Release the trigger to stop.

C A U T I O N

Before plugging in the tool, always check

to see

that the trigger switch actuates proper-

ly and returns to the "OFF" position when released.

Bolt installation

Slip the tool onto the bolt

that the inner

sleeve

completely covers the bolt tip.

CAUTION :

careful when fitting the

sleeve

onto the

bolt tip.

Striking the tip can damage i t

that it will no longer fit inside the sleeve

properly.

Keep forward pressure on the tool while

sliding

further forward until the outer

sleeve

fits completely over the nut. I f the

tool fails to fit completely over the nut,

twist the tool slightly right and left while

pushing forward.

sleeve

Pull the trigger switch. The outer

sleeve

turns to begin tightening the nut.