Makita AN611 Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita AN611. Makita AN611 13 pages. Construction coil nailer
Également pour Makita AN611 : Manuel d'instruction (19 pages), Ventilation des pièces (4 pages), Ventilation des pièces (4 pages), Manuel d'instruction (12 pages)

005619

When the tool is not to be used for an extended period of

time, lubricate the tool using pneumatic tool oil and store

the tool in a safe place. Avoid exposure to direct sunlight

and/or humid or hot environment.

005620

005621

Maintenance of compressor, air set and air

hose

After operation, always drain the compressor tank and

the air filter. If moisture is allowed to enter the tool, It may

result in poor performance and possible tool failure.

004317

1. Change lever

2. Trigger lock

1. Drain cock

004318

Check regularly to see if there is sufficient pneumatic oil

in the oiler of the air set. Failure to maintain sufficient

lubrication will cause O-rings to wear quickly.

004319

Keep the air hose away from heat (over 60°C, over

140°F), away from chemicals (thinner, strong acids or

alkalis). Also, route the hose away from obstacles which it

may become dangerously caught on during operation.

Hoses must also be directed away from sharp edges and

areas which may lead to damage or abrasion to the hose.

Thinner

004320

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

1. Air filter

1. Oiler

2. Pneumatic oil

Stove