e-survey E600 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} e-survey E600. e-survey E600 17 pages. Gnss receiver

E600 User Manual

3.6 E-bubble Calibration

E600 is equipped with e-bubble sensor which supports tilt survey in SurPad4.0

software. To calibrate the e-bubble, put the device on flat table or pole (ensure the

bubble on the pole is normal before calibration, then centering the pole bubble). In

SurPad4.0 software, connect device and click "Device" -> "Device Settings", open "E-

Bubble" function. Then, go to "Device" -> "Calibrate Sensor", click "Calibrate" to

calibrate the e-bubble.

To use tilt survey function, go to "Survey" -> "Point Survey" page, select "Tilt Point".

Then click survey button to start data collection. After collect three points on the same

location, the software will calculate a final result.