e-survey E600 사용자 설명서 - 페이지 12

{카테고리_이름} e-survey E600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. e-survey E600 17 페이지. Gnss receiver

E600 User Manual

3.6 E-bubble Calibration

E600 is equipped with e-bubble sensor which supports tilt survey in SurPad4.0

software. To calibrate the e-bubble, put the device on flat table or pole (ensure the

bubble on the pole is normal before calibration, then centering the pole bubble). In

SurPad4.0 software, connect device and click "Device" -> "Device Settings", open "E-

Bubble" function. Then, go to "Device" -> "Calibrate Sensor", click "Calibrate" to

calibrate the e-bubble.

To use tilt survey function, go to "Survey" -> "Point Survey" page, select "Tilt Point".

Then click survey button to start data collection. After collect three points on the same

location, the software will calculate a final result.