avantor VWR VC100 Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} avantor VWR VC100. avantor VWR VC100 19 pages. Controller vacuum

Imprimer la page

3.2.3. Instrument configuration

Gently touch the "SETTINGS" button to pop up the password soft

keyboard, enter the password (the default initial password is 6666), then

press "enter" key, confirm the password is correct and then pop up the

setting interface, as shown in the figure below.

Name

Pump Delay(ms)

Valve Delay(ms)

K B

P0(mbar)

Reset

After setting, click "OK" key to return to the startup interface.

Note:

Before clicking the " Reset" button, record the pressure sensor calibration

parameters (K and B). After restoring the default setting, write (K and

B) into the instrument, otherwise the pressure measurement accuracy will

be adversely affected.

Fig. 3.2.2

Function introduction

The delay time after opening or closing the vacuum

pump.

The delay time after opening or closing the solenoid

valve (inside the instrument).

Pressure sensor calibration parameters

Local atmospheric pressure value

Restore the factory settings

Table 5