Avantree Clipper Pro Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantree Clipper Pro. Avantree Clipper Pro 1 pages. Wireless receiver for headphones

Imprimer la page

材质：封面封底128G双铜 + 单色印刷

内页臻品上质80g高白纸 2个小号骑马钉

大约16页，尺寸W 105 x H 75mm

For a Better Experience

User Manual

Wireless Receiver for Headphones

Clipper Pro

www.avantree.com

3. What's in the box?

For a Better Experience

A. Avantree Clipper Pro

User Manual

B. Avantree 3.5mm audio splitter *1

Wireless Receiver for Headphones

Clipper Pro

C. 3.5mm audio cable *1

www.avantree.com

D. Micro USB charging cable *1

E. User manual & Quick user guide

- 4 -

6. LED indications

Status

LED indicator

Power on

LED flashes BLUE for 2 seconds

Power off

LED flashes RED for 2 seconds

Pairing mode

LED flashes BLUE and RED alternately

Connected

LED flashes BLUE once every 10 seconds

Disconnected

LED flashes BLUE twice every 10 seconds

LED flashes BLUE and RED together twice

Restore to default setting

(appears PINK)

Low battery

LED flashes RED once every 30 seconds

Charging

LED stays RED

Fully charged

Red LED turns off

- 9 -

For a Better Experience

www.avantree.com

[email protected]

Z-PKMN-AS7L-V1

Contents

AptX Low Latency

Product overview & basic operation

What's in the box?

Pairing and connecting

4.1. Connecting to a mobile phone/tablet

5-6

4.2. Connecting to a Bluetooth transmitter

6-7

4.3. Connecting to two Bluetooth devices simultaneously

7-8

How to reset to factory default setting?

LED indications

Charging

Product Specifications

4. Pairing and connecting

4.1. Connecting to a mobile phone/tablet

Step 1. Ensure Clipper Pro is off.

Step 2. Set Clipper Pro to PAIRING MODE (Press and hold MFB for 6 seconds

until the LED flashes BLUE and RED alternately).

Step 3. Activate Bluetooth on your phone/tablet and select "Avantree

Clipper Pro" to connect.

Pair

Connect

Enjoy

Bluetooth

Settings

Bluetooth

Devices

Avantree Clipper Pro

Hold MFB 6S

From off, hold for 6s, LED

Activate Bluetooth, search

flashes BLUE and RED

and select "Clipper Pro" to

Stream music wirelessly

alternately

connect.

- 5 -

7. Charging

When the LED flashes RED, you should recharge the device. Please remove the

micro-USB protector and charge it. It normally takes around 2 hours to fully charge

the battery. The LED will stay RED when charging and will turn off when charging is

complete.

Charging Requirement

You can connect Clipper Pro via the supplied micro USB cable to your own USB

chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC

USB port. It's ok to use most mobile phone chargers on the market.

Charge from USB charger

Charge from PC

- 10 -

1. AptX Low Latency

Avantree Clipper Pro is a Bluetooth audio receiver incorporating the latest "aptX low

latency" technology, for CD-like quality sound and with virtually no audio delay.

Ideal for games, watching TV and movies without lip sync delay.

To take advantage of the better performance offered by APTX low latency

codec, the other device must also support the same codec (Such as Avantree's

Saturn Pro, Priva II, Leaf, etc). If the transmitter only supports the normal

AptX codec, or the SBC one, these codecs will be used instead.

Audio delay by transmitter type -

Transmitter support -

The audio delay will be

aptX Low Latency codec

Around 40ms

aptX codec

Around 180ms

SBC codec (most standard Bluetooth audio)

Around 250ms

- 1 -

Reconnect:

Whenever you turn Clipper Pro on again, it will automatically reconnect to your

phone.

4.2. Connecting to a Bluetooth transmitter

Step 1. Ensure Clipper Pro is off.

Step 2. Set Clipper Pro to PAIRING MODE – Press and hold MFB for 6 seconds

until the LED flashes BLUE and RED alternately.

Step 3. Set your Bluetooth transmitter to PAIRING MODE**.

Step 4. Keep the devices close and wait for 5~30 seconds. Once connected, the

LEDs on both devices will slow down.

- 6 -

8. Product Specifications

• BT version: 4.2

• BT profile: A2DP, AVRCP, HFP, HSP

• Audio codec: aptX Low Latency, aptX, SBC

• Operational range: Class II, up to 10 meters

• Working time: Up to 6 hours

• Standby time: 100 hours

• Charging time: 2 hours

• Product weight: approx. 15g

• Product size: 50.5*26*18mm

Note: The talk and standby times may vary when used with different mobile phones

or other devices and also defendent upon different usage styles, settings and

operating environment.

- 11 -

2. Product overview & basic operation

Volume down (Previous track)

Volume up (Next track)

3.5 mm Audio jack

Micro USB port

LED indicator

Multi-function

button (MFB)

Microphone

- 2 -

Pair

Connect

Enjoy

Step 4. Once connected, turn Clipper Pro off and on again. It will then

Hold MFB 6S, LED

flashes BLUE and

RED alternately

Keep them

Note: Once disconnected over 10 minutes, Clipper Pro will automatically power

close & wait

Set transmitter

Set Clipper

Once connected, the LEDs on

Use your existing headphones

to PAIRING

pro to pairing

both devices will slow down.

to listen to the TV wirelessly

MODE*

mode

**PARING MODE: Discoverable mode for Bluetooth device, normally the LED

blinks quickly or flashes between two colors alternately.

4.3. Connecting to two Bluetooth devices simultaneously

5. How to reset to factory default setting?

Step 1. Connect the first Bluetooth device as above. Then turn off Clipper Pro.

Step 2. Set Clipper Pro to PAIRING MODE again – Press and hold MFB for 6

Step 1. Turn on the Clipper Pro

seconds until the LED flashes BLUE and RED alternately.

Step 2. Press and hold the V+ and V- button for 5 seconds

Step 3. Connect Clipper Pro to the second Bluetooth device as above.

Step 3. The Blue and Red LED will flashes twice then power off at the same time

- 7 -

Video user guide for Clipper Pro is available on Youtube.com

Telephone support: booking from Avantree.com

More FAQs and instructions on support.avantree.com

Email support: [email protected]

Avantree US Customer Serivce Line: 800 232 2078

Avantree Europe Customer Serivce Line: +1 408 600 0579

- 12 -

Basic operation

Button

Function

Operation

Power on/off

Hold MFB for 2~3 seconds to turn Clipper Pro on/off

From off mode, press & hold for 6 seconds until the

Enter pairing mode

LED indicator flashes BLUE and RED alternately.

MFB

Answer/End a call

Press MFB once when a call is incoming or in progress

Reject a call

Press & hold MFB for 2 seconds when a call is incoming

Last number redial

Double click MFB

Play/Pause

Press once MFB when streaming music

Volume up

Press V+ once

V+

Next track

Press and hold

Volume down

Press V- once

V–

Previous track

Press and hold

Mute ON

Press and hold V- for 1 second

Voice Dial (Siri)

Press V+ and V- together once

V+& V-

Restore to

Press and hold V+ and V- together for 7 seconds, the

default settings

LED flashes BLUE and RED together ( appears PINK)

Note: Some functions may not work when used with different mobile phones or

other Bluetooth devices.

- 3 -

automatically reconnect to the two devices simultaneously.

itself off.

Dual Link

- 8 -

Dispose of the packaging and

this product in accordance with

the latest provisions.