Avantree Clipper Pro Panduan Pengguna
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penerima Avantree Clipper Pro. Avantree Clipper Pro 1 halaman. Wireless receiver for headphones
材质:封面封底128G双铜 + 单色印刷
内页臻品上质80g高白纸 2个小号骑马钉
大约16页, 尺寸W 105 x H 75mm
For a Better Experience
User Manual
Wireless Receiver for Headphones
Clipper Pro
www.avantree.com
3. What's in the box?
A.
B.
C.
D.
For a Better Experience
A. Avantree Clipper Pro
User Manual
B. Avantree 3.5mm audio splitter *1
Wireless Receiver for Headphones
Clipper Pro
C. 3.5mm audio cable *1
www.avantree.com
D. Micro USB charging cable *1
E.
E. User manual & Quick user guide
- 4 -
6. LED indications
Status
LED indicator
Power on
LED flashes BLUE for 2 seconds
Power off
LED flashes RED for 2 seconds
Pairing mode
LED flashes BLUE and RED alternately
Connected
LED flashes BLUE once every 10 seconds
Disconnected
LED flashes BLUE twice every 10 seconds
LED flashes BLUE and RED together twice
Restore to default setting
(appears PINK)
Low battery
LED flashes RED once every 30 seconds
Charging
LED stays RED
Fully charged
Red LED turns off
- 9 -
For a Better Experience
www.avantree.com
Z-PKMN-AS7L-V1
Contents
1.
AptX Low Latency
1
2.
Product overview & basic operation
2
3.
What's in the box?
4
4.
Pairing and connecting
5
4.1. Connecting to a mobile phone/tablet
5-6
4.2. Connecting to a Bluetooth transmitter
6-7
4.3. Connecting to two Bluetooth devices simultaneously
7-8
5.
How to reset to factory default setting?
8
6.
LED indications
9
7.
Charging
10
8.
Product Specifications
11
4. Pairing and connecting
4.1. Connecting to a mobile phone/tablet
Step 1. Ensure Clipper Pro is off.
Step 2. Set Clipper Pro to PAIRING MODE (Press and hold MFB for 6 seconds
until the LED flashes BLUE and RED alternately).
Step 3. Activate Bluetooth on your phone/tablet and select "Avantree
Clipper Pro" to connect.
Pair
Connect
3
Enjoy
Bluetooth
Settings
Bluetooth
Devices
Avantree Clipper Pro
Hold MFB 6S
From off, hold for 6s, LED
Activate Bluetooth, search
flashes BLUE and RED
and select "Clipper Pro" to
Stream music wirelessly
alternately
connect.
- 5 -
7. Charging
When the LED flashes RED, you should recharge the device. Please remove the
micro-USB protector and charge it. It normally takes around 2 hours to fully charge
the battery. The LED will stay RED when charging and will turn off when charging is
complete.
Charging Requirement
You can connect Clipper Pro via the supplied micro USB cable to your own USB
chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC
USB port. It's ok to use most mobile phone chargers on the market.
Charge from USB charger
Charge from PC
- 10 -
1. AptX Low Latency
Avantree Clipper Pro is a Bluetooth audio receiver incorporating the latest "aptX low
latency" technology, for CD-like quality sound and with virtually no audio delay.
Ideal for games, watching TV and movies without lip sync delay.
To take advantage of the better performance offered by APTX low latency
codec, the other device must also support the same codec (Such as Avantree's
Saturn Pro, Priva II, Leaf, etc). If the transmitter only supports the normal
AptX codec, or the SBC one, these codecs will be used instead.
Audio delay by transmitter type -
Transmitter support -
The audio delay will be
aptX Low Latency codec
Around 40ms
aptX codec
Around 180ms
SBC codec (most standard Bluetooth audio)
Around 250ms
- 1 -
Reconnect:
Whenever you turn Clipper Pro on again, it will automatically reconnect to your
phone.
4.2. Connecting to a Bluetooth transmitter
Step 1. Ensure Clipper Pro is off.
Step 2. Set Clipper Pro to PAIRING MODE – Press and hold MFB for 6 seconds
until the LED flashes BLUE and RED alternately.
Step 3. Set your Bluetooth transmitter to PAIRING MODE**.
Step 4. Keep the devices close and wait for 5~30 seconds. Once connected, the
LEDs on both devices will slow down.
- 6 -
8. Product Specifications
• BT version: 4.2
• BT profile: A2DP, AVRCP, HFP, HSP
• Audio codec: aptX Low Latency, aptX, SBC
• Operational range: Class II, up to 10 meters
• Working time: Up to 6 hours
• Standby time: 100 hours
• Charging time: 2 hours
• Product weight: approx. 15g
• Product size: 50.5*26*18mm
Note: The talk and standby times may vary when used with different mobile phones
or other devices and also defendent upon different usage styles, settings and
operating environment.
- 11 -
2. Product overview & basic operation
Volume down (Previous track)
Volume up (Next track)
3.5 mm Audio jack
Micro USB port
LED indicator
Multi-function
button (MFB)
Microphone
- 2 -
Pair
Connect
3
Enjoy
Step 4. Once connected, turn Clipper Pro off and on again. It will then
Hold MFB 6S, LED
flashes BLUE and
RED alternately
Keep them
Note: Once disconnected over 10 minutes, Clipper Pro will automatically power
close & wait
Set transmitter
Set Clipper
Once connected, the LEDs on
Use your existing headphones
to PAIRING
pro to pairing
both devices will slow down.
to listen to the TV wirelessly
MODE*
mode
**PARING MODE: Discoverable mode for Bluetooth device, normally the LED
blinks quickly or flashes between two colors alternately.
4.3. Connecting to two Bluetooth devices simultaneously
5. How to reset to factory default setting?
Step 1. Connect the first Bluetooth device as above. Then turn off Clipper Pro.
Step 2. Set Clipper Pro to PAIRING MODE again – Press and hold MFB for 6
Step 1. Turn on the Clipper Pro
seconds until the LED flashes BLUE and RED alternately.
Step 2. Press and hold the V+ and V- button for 5 seconds
Step 3. Connect Clipper Pro to the second Bluetooth device as above.
Step 3. The Blue and Red LED will flashes twice then power off at the same time
- 7 -
Video user guide for Clipper Pro is available on Youtube.com
Telephone support: booking from Avantree.com
More FAQs and instructions on support.avantree.com
Email support: [email protected]
Avantree US Customer Serivce Line: 800 232 2078
Avantree Europe Customer Serivce Line: +1 408 600 0579
- 12 -
Basic operation
Button
Function
Operation
Power on/off
Hold MFB for 2~3 seconds to turn Clipper Pro on/off
From off mode, press & hold for 6 seconds until the
Enter pairing mode
LED indicator flashes BLUE and RED alternately.
MFB
Answer/End a call
Press MFB once when a call is incoming or in progress
Reject a call
Press & hold MFB for 2 seconds when a call is incoming
Last number redial
Double click MFB
Play/Pause
Press once MFB when streaming music
Volume up
Press V+ once
V+
Next track
Press and hold
Volume down
Press V- once
V–
Previous track
Press and hold
Mute ON
Press and hold V- for 1 second
Voice Dial (Siri)
Press V+ and V- together once
V+& V-
Restore to
Press and hold V+ and V- together for 7 seconds, the
default settings
LED flashes BLUE and RED together ( appears PINK)
Note: Some functions may not work when used with different mobile phones or
other Bluetooth devices.
- 3 -
automatically reconnect to the two devices simultaneously.
itself off.
Dual Link
- 8 -
Dispose of the packaging and
Dispose of the packaging and
this product in accordance with
this product in accordance with
the latest provisions.
the latest provisions.