Janam GT2 Series Manuel d'étalonnage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'étalonnage pour {nom_de_la_catégorie} Janam GT2 Series. Janam GT2 Series 3 pages.
Également pour Janam GT2 Series : Manuel de démarrage rapide (12 pages)

Imprimer la page

Step 3

Compare the average values from Steps 1 and 2. If these two values are different, the temperature

reading must be calibrated. To prepare for calibration, complete the following steps:

1. Connect to Wi-Fi, record the IP address on the screen

2. Input the IP address plus +port 8090 in the PC Chrome window (Example: 192.168.8.2∶8090)

3. Access the control panel by entering the password "123456"

4. Access

Settings

by clicking the gear icon on the blue menu bar at the bottom of the menu

Step 4

In the temperature measurement calibration field, enter the difference between the FDA-approved

thermometer (Step 1) and GT2's temperature reading functionality (Step 2). For the example used,

the value that should be entered is "0.1".

•

Positive calibration ("compensation") is between 0.0 ~ 10.0

•

Negative calibration ("compensation") is between -0.0 ~ -10.0

Janam Technologies LLC

GT2

Calibration Guide