AirGorilla PCO/UV N-Duct Manuel de l'installateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'installateur pour {nom_de_la_catégorie} AirGorilla PCO/UV N-Duct. AirGorilla PCO/UV N-Duct 8 pages.
Également pour AirGorilla PCO/UV N-Duct : Manuel du propriétaire (6 pages)

Imprimer la page

SPECIFICATIONS

Dimensions

• Mounting Plate: 7" x 13"

• PCO Filter: 11" x 17"

• UV Lamp: 1.75" x 16.25"

• Duct mounting hole: 5" x 11"

Weight

• Complete Unit: 4 lbs.

Electrical

• 120V-277V, 50/60Hz

• Powercord - 9 ft., 3 prong,

rated to 240V

• UL Listed Electronic Ballast

UV Lamp

• 36 watt, 105 w/cm

Material

• Mounting Plate and Enclosure -

Fire Retardant ABS

INSTALLATION

IMPORTANT

This unit must be installed in compliance and in accordance with all national,

state, and local electrical and mechanical codes. Failure to do so will void all

expressed or implied warranty representations.

The PCO/UV N-Duct™ unit is designed for air disinfection and installs into the air handling

system or ductwork. Select a mounting location that offers sufficient space for the mounting

plate 7" x 13" and enough internal space for the UV lamps and PCO filter 11" H x 17" D. In

addition, allow for sufficient space for removal (pulling out) of an 18" UV lamp. Installation

also requires access to 120 – 277 VAC electrical power.

• Do not install where UV lamp is visible

• Do not expose wiring or plastic to UV light

• If installed near an air filter, check with the filter manufacturer for UV properties & safety.

@1 mtr.

• Do not install in outdoor applications

• Do not install beneath a humidifier