Lexmark CS510 Series Manuel de référence rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Lexmark CS510 Series. Lexmark CS510 Series 15 pages. Color laser printer
Également pour Lexmark CS510 Series : Note technique (3 pages), Feuille de configuration (2 pages), Manuel (19 pages), Manuel de qualité des couleurs (6 pages), Carte du menu (3 pages), Manuel d'impression (3 pages), Manuel de déménagement (2 pages), Spécifications (2 pages), Manuel rapide (2 pages), Spécifications (2 pages), Brochure & Specs (2 pages), Manuel d'entretien (18 pages)

Imprimer la page
Lexmark CS510 Series Manuel de référence rapide
•
The largest supported Universal size is 216 x
356 mm (8.5 x 14 inches) for one‑sided and two‑sided printing.
1
From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select
a unit of measure
2
Touch Portrait Width or Portrait Height.
3
Select the width or height, and then touch
Loading the 250 and 550‑sheet tray
The printer has one 250-sheet tray (Tray 1) with an integrated manual
feeder. The 250-sheet tray, the 650-sheet duo tray, and the 550-sheet
tray support the same paper sizes and types and are loaded in the same
way.
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all trays
closed until needed.
1
Pull out the tray completely.
Note: Do not remove trays while a job is printing or while Busy
appears on the display. Doing so may cause a jam.
2
If the paper is longer than letter‑size paper, then push the length
guide tab at the back of the tray to extend it.
.
3
Squeeze the length guide tab, and then slide the guide to the
correct position for the size of the paper being loaded.
Note: Use the size indicators on the bottom of the tray to help
position the guide.
1
2
1
2
3
4
Squeeze and slide the width guide to the correct position for the
size of the paper being loaded.
2
Note: Use the paper size indicators on the bottom of the tray to
help position the guides.
5
Flex the sheets back and forth to loosen them. Do not fold or crease
the paper. Straighten the edges on a level surface.
1