Lexmark CS510 Series 빠른 참조 매뉴얼 - 페이지 3

{카테고리_이름} Lexmark CS510 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark CS510 Series 15 페이지. Color laser printer
Lexmark CS510 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 설정 시트 (2 페이지), 매뉴얼 (19 페이지), 색 품질 매뉴얼 (6 페이지), 메뉴 맵 (3 페이지), 인쇄 매뉴얼 (3 페이지), 이동 매뉴얼 (2 페이지), 사양 (2 페이지), 빠른 매뉴얼 (2 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 서비스 매뉴얼 (18 페이지)

•

The largest supported Universal size is 216 x

356 mm (8.5 x 14 inches) for one‑sided and two‑sided printing.

From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select

a unit of measure

Touch Portrait Width or Portrait Height.

Select the width or height, and then touch

Loading the 250 and 550‑sheet tray

The printer has one 250-sheet tray (Tray 1) with an integrated manual

feeder. The 250-sheet tray, the 650-sheet duo tray, and the 550-sheet

tray support the same paper sizes and types and are loaded in the same

way.

CAUTION—POTENTIAL INJURY: To reduce the risk of

equipment instability, load each tray separately. Keep all trays

closed until needed.

Pull out the tray completely.

Note: Do not remove trays while a job is printing or while Busy

appears on the display. Doing so may cause a jam.

If the paper is longer than letter‑size paper, then push the length

guide tab at the back of the tray to extend it.

Squeeze the length guide tab, and then slide the guide to the

correct position for the size of the paper being loaded.

Note: Use the size indicators on the bottom of the tray to help

position the guide.

Squeeze and slide the width guide to the correct position for the

size of the paper being loaded.

Note: Use the paper size indicators on the bottom of the tray to

help position the guides.

Flex the sheets back and forth to loosen them. Do not fold or crease

the paper. Straighten the edges on a level surface.