Fronius 63A-1 Manuel de démarrage rapide - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Fronius 63A-1. Fronius 63A-1 10 pages. Smart meter
Également pour Fronius 63A-1 : Manuel rapide (17 pages), Manuel rapide (20 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (8 pages)
Imprimer la page
Wiring detail for 3-Phase Smart Meter 63A/3PH and Datamanager V2
Wiring detail for Single Phase Smart Meter 63A/1PH*** and Fronius Datamanager V2
Modbus termination switch on the Datamanager
The internal bus termination 120-Ohm resistance (for Modbus RTU) needs to
be switched to ON to be activated.
Please Note:
The termination resistance must be activated for the first and last device in an
RS-485 bus.
(c) Fronius Australia Pty. Ltd, 2015
(Diagram 5)
(Diagram 6)
* The 120 Ohm terminating
resistor comes with the
meter
** It is important to connect
the Neutral.
* The 120 Ohm terminating
resistor comes with the meter
*** Please note that the
connections 33, 34, 35 on the
Fronius Smart Meter are in
reverse order to those shown
in diagram 6!
8/10