Gardena 2516 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 2516. Gardena 2516 7 pages. Accu shrub shears

Imprimer la page

GARDENA Accu Shrub Shears

1. Technical Data

Accu

6 NC à 1.2 V = 7.2 V

Mains connections

for charging device

230 V / 50 Hz

Charging time (with empty cells)

20 Std.

Usual charging time

14 Std.

Approx. running time

(with fully charged cells)

approx.

75 min. (depending on grass to be cut)

Cutting length

170 mm

Noise level L

77 dB (A)

Vibrations a

< 2.5 ms

vhw

1) Directive 2000 /14 / EC 2) prEN 50260-1

Measuring method according to

2. Operating Instructions Information

Please read and follow these

For safety reasons chil-

operating instructions carefully.

dren under the age of

Familiarise yourself with the unit's

16 or people not familiar with

features, its proper use and the

these operating instructions

safety instructions included.

must not use these Accu Shrub

Shears.

3. Proper Use

The GARDENA Accu Shrub

It is essential to observe the

Shears are intended for cutting

manufacturer's operating instruc-

individual bushes, shrubs and

tions to ensure the unit's proper

climbing plants in private domes-

functioning. The operating instruc-

tic and hobby gardens.

tions also contain advice for

service, maintenance and repair.

They are not designed for use in

public facilities, parks, sporting

Attention! For health and

grounds, on roads, in agriculture

safety reasons the Accu

or forestry.

Shrub Shears must not be used

4. Putting into Operation

4.1 Operating Parts

Socket for connection plug

Charger cable

on handle

Socket

Safety lock on handle

Charger

ON button on handle

Safety lock (appliance)

Release button on handle

ON button

Blade guard

Screws

Housing screws

Cutting blade

Cable adaptor

Eccentric wheel

Top blade

Swivel handle (not included)

Traveller

Handle holder

Connecting link

Handle connection plug

Grass shear cutting blade

(not included)

-2

Please keep these instructions

in a safe place.

for cutting grass / grass edges

and for chopping up for com-

posting.

Attention ! For risks of

injury the accu must not

be used as power source for

other devices.

4.2 Preparations for Use

(Fig. A)

Before using the shears for the

first time and if the accu is flat,

the Accu Shrub Shears must first

be re-charged:

1. Plug the charger cable

into the plug socket

Accu Shrub Shears.

2. Plug the charger

mains socket. The charging

time is approx. 20 hours.

4.3 Assembling the Swivel

Handle (Option) and Putting the

Shears into Operation (Fig. C)

With the GARDENA swivel handle

Art. No. 2354 (not included) you

can also use the Accu Shrub

Shears to cut higher bushes and

climbers. You can turn the shears

or the handle by 45°.

Assemble the swivel handle as

follows:

1. To lock the shears, set the

safety lock on the Accu Shrub

Shears to the right (position 0).

2. Guide the swivel handle

the angle you require into the

handle holder

3. Plug the handle connection

plug

into the socket

shears are now ready to use.

4. Now unlock the safety lock

on handle

and

5. Press the ON button on the

handle

to turn the shears

on.

4.4 Removing the Swivel

Handle

1. Switch the Accu Shrub Shears

off by pressing the ON button

on the handle

the safety lock on handle

to prevent the shears starting

again unintentionally.

Warning ! To prevent injury,

wait until the blade has

stopped moving.

5. Maintenance, Care, Storage

5.1 Maintenance and Care

Maintenance includes all jobs

which keep your Accu Shrub

Shears in perfect working

order. By regularly checking the

unit (firm seating of screw con-

nections, cracks, damage) and

replacing defective or worn parts

you can prevent accidents and

failure.

of the

Repairs may only be carried

out by GARDENA service

into the

centres or dealers authorised

by GARDENA.

Warning ! Before working

with, checking, cleaning

2. Remove the handle connection

plug

from the socket

3. Press the release button

the handle and pull the handle

out of the holder.

4.5 Putting into Operation

(Fig. B)

The safety lock

prevents the

Shrub Shears being switched

on unintentionally.

To begin using the Shrub Shears:

1. Push the safety lock to the left.

Press the ON button

The Accu Shrub Shears start

moving.

until it locks.

2. To stop the Shrub Shears,

release the ON button

. The

Warning ! The blade does

not stop moving immediately

after the shears have been

switched off.

Note : The accu must only be

re-charged when the cutting per-

formance decreases.

The safety devices

installed by the manufac-

turer must not be removed

and / or bridged, eg: by fasten-

and engage

ing down the starting lockout

of the pushbutton switch on

the handle as there is danger

of injury because the tool will

not switch off automatically.

and maintaining the Accu

Shrub Shears :

1. For safety reasons, push the

safety lock

on the appli-

ance, resp. on the handle

to the right to position 0

( to lock the ON button).

2. Unplug the shears from

the mains (charging).

The cutting blade should be

cleaned after each use and lubri-

cated with an oil of low viscosity

(e.g. spray-oil).

Due to risk of personal

injury and material dam-

age, never clean the Accu

4.6 Changing the Blade

(Fig. D / D 1)

Attaching the Hedge Clippers

Blade

1. Push the top blade

all the

way to the back.

2. Position the connecting link

in the centre of the elongated

hole.

3. Turn the eccentric wheel

as shown in Figure D 1.

4. Slide the blade under the

blade carrier of the traveller

Note ! Ensure that the eccentric

wheel

is guided securely

in the connecting link

5. Tighten the screws.

Note ! Clean the gears before

you insert the new blade.

Lubricate the cogwheels with

acid-free lubricant (Vaseline).

Oil the blade before and after

use with a small amount of oil

(do not lubricate).

Attaching the GARDENA Grass

Shears Blade (Art. No. 2346)

The GARDENA grass shears

blade, Art. No. 2346, can be fitted

as an alternative to the hedge

clippers blade. The blade is

attached as described under

"Attaching the Hedge Clippers

Blade".

Shrub Shears with running

water, in particular a high

pressure water jet.

Inspect the cutting de-

vices at regular intervals

for damage. Ensure that all

damage is properly repaired

immediately.

5.2 Storage

1. Push the blade guard

provided onto the blade

of the Accu Shrub Shears.

2. Store the Accu Shrub Shears

in a dry and frostfree place.

Keep out of the reach of chil-

dren.