AlienPro ALPHA-S Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AlienPro ALPHA-S. AlienPro ALPHA-S 5 pages.

Imprimer la page

Safety Instructions

- Please open and check whether break or not for transport once receive this fixture, if yes, not use

it and contact dealer or manufacture as soon as possible.

- The Max applicable temperature for the light is 40°C. Do not use the light under or above the

temperature. ta=40

- The fixture is applicable for many occasions, it should keep clean, and avoid long use in overheating

or dusty environment. To prevent the fixture from the chemical liquid .

- User must be careful of fire, heat, electric and fall-off that make heavy or fatal injury. Please read

this user manual carefully before power on and installation, following safety and operation instruc-

tion in it. If still have any questions, please contact dealer or manufacture.

- User must following this user manual, do not open fixture by yourself, if any problems, please

contact professional technician, maintenance should by technician.

- Do not power on or start the fixture before installation, please stop after working more than 8

hours, which will longer use life.

- Fixed installation, do not by strong shocks.

- The minimum distance between light and the illuminated surface must be more than 1 meter.

- Never look directly into the light source to avoid hurt to eyes (especially epileptics)!

- When dustproof glass at light output breaks, cracks or other visible damage, user should replace

with new glass to continue to use.

Installation

- When install this equipment please make sure there's no flammable surfaces (decorated things,

etc) and minimum distance of 0.5M from the equipment to the flammable.

- The installation of the effect has to be built and constructed in a way that it can hold 10 times the

weight and without any harming deformation.

- The installation must always be secured with a secondary safety attachment, e.g. an appropriate

safety rope. Never stand directly below the device when mounting, removing or servicing the fixture.

Technical Specifications

Input voltage: AC127V, 60Hz

Fuse: BGDP ￠5x20mm 250VAC T2A

Total power: 30W

Light source: R:250mw/638nm，G:100mw/532nm，B:500mw/445nm

Control mode: Auto/Sound/DMX512

Channels：16CH

Scanning system: 10Kpps Scanner, ±15º

Surface temp: Tb=40ºC ( this data testing when the environment temp is 30ºC)

Working temp: 10ºC--65ºC

Modulation: TTL

N.W: 4.0Kg

G.W: 4.5Kg

Inner packing size: 36X30X16cm

Outer packing size: 70X38X32cm(4pcs/ctn)

w w w . a l i e n p r o . c o m . m x

Ringing

1 Mounting bracket

2 Handle

A) The ambient temperature range is -25°C--45°C, must never be exceeded.

B) The installation of the projector has to be built and constructed in a way that it can hold 10 times

the weight for 1 hour without any harming deformation.

C) When rigging, derigging or servicing the fixture staying in the area below the installation place, on

bridges,under high working places and other endangered areas is forbidden.

D) The operator has to make sure that safety-relating and machine-technical installations are

approved by an expert before taking into operation for the first time and after changes before taking

into operation another time.

E) The operator has to make sure that safety-relating and machine-technical installations are

approved by a skilled person once a year.

F) Sure M8 screws on mounting bracket fixed middle hole ¢12.5mm of handle

Product size

Wiring diagram

w w w . a l i e n p r o . c o m . m x