a&p instruments UX 3081WQ Manuel d'utilisation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} a&p instruments UX 3081WQ. a&p instruments UX 3081WQ 20 pages. Moisture analysers

Imprimer la page

Operating instructions for moisture analysers

UX 3081

UX 3081WQ

Error

Measuring

Heater will not switch on:

Infrared heater will not

switch off

Measurement not completing: Shut-off settings incorrect

Printer

No printout

No linefeed

Printout invisible

Printout too light

Care and maintenance

Please ensure that no pollutants enter the device.

Always keep the area around the tray holder clean.

Do not use compressed air to clean the device.

Do not overload the scales, max. 400 g.

Protect device from moisture and impact.

For ideal care and maintenance, we recommend taking out a service contract.

a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820

E-Mail: [email protected], Internet: www.apinstruments.de

Reason

Heater is faulty

Temperature sensor is faulty

S202S01 relay is faulty

Automatic shut-off is set incorrectly

Timer is set incorrectly

Timer settings incorrect

Printer is faulty or

no data transmission

Linefeed button or printer is faulty

No connection to printer

No thermal paper

Printing unit or printer board is faulty

Printing unit is dirty

Solution

Change heater

Contact a&p instruments

Check shut-off settings

Check timer settings

Check shut-off settings

Contact a&p instruments

Use the thermal paper from a&p

Contact a&p instruments

Seite 17