a&p instruments UX 3081WQ Kullanım Talimatları Kılavuzu - Sayfa 17
Ölçüm Cihazları a&p instruments UX 3081WQ için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. a&p instruments UX 3081WQ 20 sayfaları. Moisture analysers
Sayfayı YazdırOperating instructions for moisture analysers
UX 3081
UX 3081WQ
Error
Measuring
Heater will not switch on:
Infrared heater will not
switch off
Measurement not completing: Shut-off settings incorrect
Printer
No printout
No linefeed
Printout invisible
Printout too light
Care and maintenance
Please ensure that no pollutants enter the device.
Always keep the area around the tray holder clean.
Do not use compressed air to clean the device.
Do not overload the scales, max. 400 g.
Protect device from moisture and impact.
For ideal care and maintenance, we recommend taking out a service contract.
a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820
E-Mail: [email protected], Internet: www.apinstruments.de
Reason
Heater is faulty
Temperature sensor is faulty
S202S01 relay is faulty
Automatic shut-off is set incorrectly
Timer is set incorrectly
Timer settings incorrect
Printer is faulty or
no data transmission
Linefeed button or printer is faulty
No connection to printer
No thermal paper
Printing unit or printer board is faulty
Printing unit is dirty
Solution
Change heater
Contact a&p instruments
Contact a&p instruments
Check shut-off settings
Check timer settings
Check shut-off settings
Contact a&p instruments
Contact a&p instruments
Contact a&p instruments
Contact a&p instruments
Use the thermal paper from a&p
Contact a&p instruments
Contact a&p instruments
Seite 17