Align-Pilates M2-Pro Reformer Instructions d'assemblage et manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et manuel d'utilisation pour {nom_de_la_catégorie} Align-Pilates M2-Pro Reformer. Align-Pilates M2-Pro Reformer 12 pages. Reformer

2. Unpacking the second outer box:
a. Carefully take off the lid of the carriage bed box and remove the bubble wrap - do not use a knife as you may
cut the vinyl - (you will notice there is a second box, please remove and put aside for use later in assembly) see
Fig.12.
b. We recommend 2 people remove the carriage bed from the box. It is best to familiarise yourself with the
underneath of the carriage at this point, so you are familiar with the functionality, including the side wheel
adjustment, spring attachment system and carriage anti-tipping device (Fig.13).
c. You will need to insert the carriage bed (2 people required) at an angle so the anti-tipping system does not hit
the runner (please bear this in mind when removing the carriage in future - you can only lift up one side) . You will
also need to ensure the bed is correctly orientated with the springs towards the padded footbar prior to inserting
(Fig.14).
d. It's now time to open the smaller box from the second carton, which contains the maple rope risers, the
shoulder rests, pulleys, ropes and handles (Fig.15).
x2 maple
rope risers
double loop
4
x2 silent
handles
Fig.12
Fig.14
x2 shoulder
rests
Fig.13
x2 silent
rope pulleys
x2 silent
ropes
Fig.15