Align-Pilates M2-Pro Reformer Instructions d'assemblage et manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et manuel d'utilisation pour {nom_de_la_catégorie} Align-Pilates M2-Pro Reformer. Align-Pilates M2-Pro Reformer 12 pages. Reformer

Imprimer la page

M2-Pro User Guide

1) Identifying the springs

The springs can be identified with the

corresponding colour code:

Red - Medium x 2

Blue - Light x 2

Green - Strong x 1

2) Adjusting the ropes

The M2-Pro includes the Pro Rope Adjusters which allows you to easily & quickly change the rope length of an

individual rope, or both together, to offer maximum versatility and convenience. Simply pull down the lever on the

Pro Rope Adjuster and slide the rope forward or backward to the desired length and then release the lever to lock

into place.

3) Adjusting the rope height

The ropes are very simple and easy to adjust; twist and pull the knob, slide to the desired height and lock into place.

4) Adjusting the spring bar & carriage stopper

a. The spring bar must be adjusted in conjunction with the carriage stopper, this is so the springs are always under

light tension when attached, each spring bar position has a corresponding carriage stopper position.

b. Ensure the springs are disconneted prior to moving the spring bar and then remove the carriage stopper.

c. Next, to move the spring bar, pull up on the two black knobs at either end of the bar and then slide to desired

setting (Fig.i).

d. Once the bar is in position, insert the carriage stopper in to the corresponding hole (Fig.ii & iii). For example; for

the spring bar position closest to the end of the frame, use the first hole closest to the frame.

5) Adjusting the head rest

The head rest has 3 positions including flat. Use the wooden height adjuster block to select the height preferred.

Flat

Fig.i

Medium

Fig.ii

Fig.iii

High