AEG 944187733 Manuel de l'utilisateur - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG 944187733. AEG 944187733 48 pages.
22
www.aeg.com
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-Off
For safety reasons the oven turns off
automatically after some time, if a
heating function works and you do not
change any settings.
(°C)
30 - 115
120 - 195
200 - 245
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
again and again until the
to confirm.
the heating function
works.
lets you turn the function:
Set + Go on and off.
(h)
12.5
8.5
5.5
) to start
250 - maximum
The Automatic Switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the oven is
turned off, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the
– if the oven is turned off and you
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
11.1 Cooking
recommendations
Your oven may bake or roast differently
to the oven you had before. The tables
below show recommended settings for
temperature, cooking time and shelf
position for specific types of the food.
If you cannot find the settings for a
special recipe, look for the similar one.
(°C)
3
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
set the function: Minute Minder.
When the function ends, the
display goes back to the night
brightness.
(h)