AEG BE5304001 Manuel de l'utilisateur - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG BE5304001. AEG BE5304001 36 pages. Built-in oven
Également pour AEG BE5304001 : Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (36 pages)

Imprimer la page

What to do if...

2. Hold the door t (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal.

3. Pull the door t to the front to remove it.

4. Hold the door glass panels on their top

edge one by one and pull them up out of

the guide

5. Clean the door glass panels.

To install panels follow the procedure in re-

verse. Install the smaller panel first, then the

larger.

WHAT TO DO IF...

WARNING!

Refer to "Safety information" chapter.

Problem

The oven does not heat up

The oven lamp does not operate The oven lamp is defective

The display shows C2

Possible cause

The appliance is switched off

The clock is not set

The necessary settings are not

set

The automatic cut-out is

switched on

The fuse is released

You want to start the defrost

function but you did not re-

move food sensor plug from

the socket.

Solution

Switch on the appliance

Set the clock. Refer to "Setting

the clock"

Make sure, the settings are cor-

rect

Refer to „Automatic cut-out"

Make sure, if the fuse is the

cause for the malfunction. If

the fuse releases again and

again, refer to an authorized

electrician

Replace the oven lamp.

Remove the food sensor plug

from the socket