AEG BE5304001 Manuel de l'utilisateur - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG BE5304001. AEG BE5304001 36 pages. Built-in oven
Également pour AEG BE5304001 : Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (36 pages)

Imprimer la page

Problem

The display shows F2

The display shows an error code

that is not in this list

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the oven cavity.

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

INSTALLATION

WARNING!

Refer to "Safety information" chapter.

The built-in unit must meet the stability requirements of DIN 68930.

Possible cause

• The door is not closed cor-

rectly

• The door lock is defect

There is an electronic fault

Installation

Solution

• Close the door correctly

• Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows F2 again,

refer to the Customer Care

Department

• Switch off the appliance

with the house fuse or the

safety switch in the fuse box

and switch it on again

• If the display shows the error

code again, refer to the Cus-

tomer Care Department

.........................................